Population Variance (σ²)
σ² = Σ(xᵢ - μ)² / NAverage squared deviation from population mean
When you have entire population data
Calculate sample variance and population variance with step-by-step explanation of the formula.
https://www.solvezi.com/statistics/variance-calculator
Measure data dispersion
Using sample (divide by n-1 for unbiased estimate)
| # | Value | Action |
|---|---|---|
| 1 | ||
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 |
6 values (minimum 2 required)
Sample Variance
0.000000
s² = Σ(x-x̄)²/(n-1)
Standard Deviation
0.000000
√Variance
Summary Statistics
Understanding Variance and Standard Deviation
• Variance measures the average squared deviation from the mean.
• Standard Deviation is the square root of variance (same units as data).
• Population vs Sample: Sample variance uses (n-1) for unbiased estimation.
• Larger variance = more spread out data, smaller variance = data clustered around mean.
Variance & Standard Deviation Calculator • Measure data dispersion
Master variance and standard deviation — understand population vs sample formulas, calculate spread and dispersion, interpret variability in data, and apply to quality control, finance, medical research, and data science.
Variance measures how spread out data points are from the mean. It's the average of squared deviations from the mean.
"How much do individual data points typically differ from the average — and how spread out is my data?"
Average squared deviation from mean
Var(X) = E[(X - μ)²]Always ≥ 0
Variance cannot be negativeSquared units of measurement
If data in cm, variance in cm²Sensitive to extreme values
Squaring amplifies outlier impactVariance of sum of independent variables
Var(X+Y) = Var(X) + Var(Y)σ² = Σ(xᵢ - μ)² / NAverage squared deviation from population mean
When you have entire population data
s² = Σ(xᵢ - x̄)² / (n-1)Unbiased estimate of population variance
When working with sample data
σ = √σ² or s = √s²Square root of variance (original units)
Interpretable measure of spread
SS = Σ(xᵢ - x̄)²Total squared deviations
Intermediate calculation for variance
| Aspect | Population (σ²) | Sample (s²) |
|---|---|---|
| Symbol | σ² | s² |
| Denominator | N (population size) | n - 1 (degrees of freedom) |
| Bias | Unbiased (true variance) | Unbiased estimator of σ² |
| Use case | Complete census data | Most research (estimation) |
Remember: Always use sample variance (divide by n-1) when working with sample data. The population formula underestimates true variance — Bessel's correction provides an unbiased estimate.
Data tightly clustered around mean
Data widely spread from mean
All values are identical
Poor precision, high uncertainty
Unbiased but high variance
Still noticeable adjustment
10% difference from n
~3% difference from n
~1% difference from n
~0.1% difference
Var(c) = 0 for constant cVar(cX) = c² × Var(X)Var(X + c) = Var(X)Var(X + Y) = Var(X) + Var(Y) + 2Cov(X,Y)Var(X - Y) = Var(X) + Var(Y) - 2Cov(X,Y)Monitor and reduce production variability
Measure investment risk
Assess treatment reliability
Evaluate assessment fairness
Evaluate athlete reliability
Pre-process and analyze data
Sum all values and divide by number of observations
Subtract mean from each value: (xᵢ - x̄)
Square each deviation: (xᵢ - x̄)²
Calculate Sum of Squares (SS)
Variance = SS / denominator
Standard deviation = √variance
Using population formula for sample data
Use n-1 (sample formula) for unbiased estimate
Population formula underestimates variance from samples
Interpreting variance as standard deviation
Variance is in squared units — less interpretable
Report standard deviation for interpretation
Ignoring outliers in variance calculation
Variance is highly sensitive to outliers
Check data for outliers before interpreting
Comparing variances across different scales
Use coefficient of variation (CV) for comparison
CV = s/x̄ × 100% standardizes by mean
Bessel's correction uses n-1 to make sample variance an unbiased estimator of population variance. Using n would systematically underestimate population variance because sample mean minimizes squared deviations. As sample size increases (n → ∞), n-1 ≈ n, so correction becomes negligible.
Degrees of freedom (df) represent the number of independent pieces of information. For variance, df = n-1 because once you know the mean and n-1 values, the nth value is determined. This explains why sample variance uses n-1 — we lose one degree of freedom estimating the mean.
No, variance is always ≥ 0. Zero variance occurs when all values are identical. Negative variance is mathematically impossible because it's the average of squared deviations (always non-negative). If you calculate negative variance, check for computational errors or missing absolute values.
Variance measures dispersion — higher variance means greater spread/risk. In finance, variance quantifies asset volatility (risk). In quality control, lower variance indicates consistent production. However, variance is in squared units, so standard deviation (√variance) is often preferred for interpretation.
MAD uses absolute deviations (|x - x̄|) instead of squared deviations. Variance penalizes larger deviations more heavily due to squaring, making it more sensitive to outliers. MAD is more robust but mathematically less convenient (not differentiable at zero).
Outliers have a large impact because deviations are squared. A single extreme value can dramatically inflate variance. Example: Dataset [10,10,10,10,100] has variance ≈ 1296 compared to variance ≈ 0 without outlier. Always examine data for outliers before interpreting variance.
Standard error (SE) of the mean is s/√n (for sample). SE measures precision of the sample mean estimate, while variance measures spread of individual data points. SE decreases with sample size; variance is a population/sample characteristic independent of sample size.
Typically report standard deviation (SD) not variance because SD is in original units. Example: 'The mean was 45.2 (SD = 8.7).' If reporting variance: 'The variance was 75.7.' Include whether population (σ²) or sample (s²). Report sample size (n) and degrees of freedom.
1890-1962
Formalized variance and ANOVA (1918)
Also developed maximum likelihood estimation
1857-1936
Introduced standard deviation concept
Father of mathematical statistics
1789-1857
Worked on moments and dispersion
Pioneered mathematical analysis
Did You Know? Ronald Fisher introduced the term "variance" in his 1918 paper "The Correlation Between Relatives on the Supposition of Mendelian Inheritance." He needed a way to partition total variation into components, leading to the development of ANOVA (Analysis of Variance). Variance remains fundamental to modern statistics.
With Standard Deviation:
"The mean response time was 45.2 ms (SD = 8.7)."For Variance:
"The sample variance was s² = 75.7 (n = 30, df = 29)."In Tables:
"Values are presented as Mean ± SD. All reported variances used Bessel's correction (n-1)."Best Practice: Report standard deviation (SD) rather than variance for interpretation. If reporting variance, specify whether population (σ²) or sample (s²) and include degrees of freedom.
Variance calculator and complete guide. Calculate population variance (σ²) and sample variance (s²), standard deviation, sum of squares, and measures of dispersion. Learn Bessel's correction (n-1), interpret variability, and apply to quality control, finance, medical research, and data science.