Probability Mass Function (PMF)
P(X = k) = C(n,k) × p^k × (1-p)^(n-k)Probability of exactly k successes
Example: n=10, p=0.5, k=5: P=0.2461
Calculate binomial probabilities, cumulative probabilities, mean, variance, and standard deviation.
https://www.solvezi.com/statistics/binomial-distribution-calculator
Model success counts in independent trials
Range: 0 to 1
Mean (μ)
5.0000
n × p
Variance (σ²)
2.5000
n × p × (1-p)
Std Dev (σ)
1.5811
√variance
Skewness
0.0000
(1-2p)/σ
Probability
P(X = 5) = 0.00000000
≈ 0.0000%
Quick Select k:
Probability Distribution
Binomial Distribution Properties
Binomial Distribution
Models the number of successes in n independent Bernoulli trials with constant success probability p.
Binomial Distribution Calculator • Model success counts in independent trials
Complete guide to the binomial distribution — understand probability mass function, cumulative probabilities, and real-world applications. Learn when to use binomial, how to interpret results, and when normal approximation applies.
The binomial distribution is a discrete probability distribution that models the number of successes in a fixed number of independent trials, where each trial has the same probability of success.
"Flip a fair coin 10 times. What's the probability of getting exactly 5 heads?"
✓ 10 trials (n=10) | ✓ Independent flips | ✓ Two outcomes (Heads/Tails) | ✓ p=0.5 constant
P(X = k) = C(n,k) × p^k × (1-p)^(n-k)Probability of exactly k successes
Example: n=10, p=0.5, k=5: P=0.2461
P(X ≤ k) = Σ P(X = i) for i = 0 to kProbability of k or fewer successes
Example: n=10, p=0.5, k=5: P=0.6230
μ = n × pAverage number of successes
Example: n=100, p=0.3: μ=30
σ² = n × p × (1-p)Spread of the distribution
Example: n=100, p=0.3: σ²=21
σ = √[n × p × (1-p)]Typical deviation from mean
Example: n=100, p=0.3: σ≈4.58
γ = (1 - 2p) / √[n × p × (1-p)]Asymmetry measure
Example: p=0.3: positive skew
Manufacturing companies use binomial to calculate defect rates
Clinical trials analyze success/failure outcomes
Digital marketers compare two versions of content
Predict athlete performance in repeated attempts
Model binary outcomes in financial markets
Evaluate classifier performance on test sets
Bell-shaped curve centered at n/2
Longer tail on the right side
Longer tail on the left side
Approximates Poisson distribution
Use normal approximation
Check BINS: Binary outcomes, Independence, Number fixed, Same probability
Identify n (trials), p (success probability), and k (successes of interest)
Select PMF (exact), CDF (cumulative), or Inverse (find k)
Use P(X=k) = C(n,k) × p^k × (1-p)^(n-k)
Understand probability in context of your problem
Verify conditions for normal approximation if used
When np ≥ 5 and n(1-p) ≥ 5, the binomial distribution can be approximated by a normal distribution with:
μ = npσ = √[np(1-p)]Continuity Correction:
Add/subtract 0.5 for better accuracyP(X ≤ k) ≈ Φ((k + 0.5 - np)/σ)
"Trials don't need to be independent"
Independence is crucial. If trials affect each other, binomial distribution doesn't apply.
Use hypergeometric distribution for sampling without replacement
"p can change between trials"
Success probability must remain constant across all trials.
Check that conditions like Bernoulli trials are satisfied
"Normal approximation works for all n"
Normal approximation requires np ≥ 5 and n(1-p) ≥ 5.
Use continuity correction for better accuracy
"Binomial only works for small numbers"
Binomial works for any n with proper computation methods.
Modern calculators handle large n efficiently
A Bernoulli trial is a single experiment with two outcomes (success/failure). The binomial distribution models the sum of n independent Bernoulli trials. So Bernoulli is the building block of binomial (n=1 case).
The binomial coefficient 'n choose k' can be calculated as n! / (k! × (n-k)!). Many calculators have a built-in function (nCr). For large n, use the formula: C(n,k) = C(n-1,k-1) × n/k or the recursive approach our calculator uses.
When approximating binomial with normal, use continuity correction: P(X ≤ k) ≈ Φ((k + 0.5 - np)/σ) and P(X ≥ k) ≈ 1 - Φ((k - 0.5 - np)/σ). This improves accuracy by about 0.5 in the normal approximation.
Poisson distribution approximates binomial when n is large and p is small, with λ = np fixed. Rule of thumb: n ≥ 20 and p ≤ 0.05, or n ≥ 100 and np ≤ 10. Poisson is computationally simpler for rare events.
The mode is the most likely number of successes. It's approximately floor((n+1)p) or ceil((n+1)p) - 1. For integer values, there can be two modes when (n+1)p is an integer.
The binomial test is a statistical test used to determine if the observed proportion of successes differs from an expected proportion. It's an exact alternative to the normal approximation z-test for proportions.
No, binomial strictly handles two outcomes. For three or more outcomes, use multinomial distribution. Each trial then has multiple possible categories instead of just success/failure.
As n increases, the binomial distribution becomes more concentrated around the mean. For fixed p, the variance σ² = np(1-p) increases with n, but the relative spread (σ/μ) decreases as 1/√n.
1655-1705
Ars Conjectandi (1713) - first systematic study
1667-1754
Normal approximation to binomial (1733)
1749-1827
Central Limit Theorem for binomial
1857-1936
Chi-square goodness-of-fit tests
Did You Know? Jacob Bernoulli's Ars Conjectandi (1713) first established the binomial theorem and law of large numbers. He observed that as the number of trials increases, the observed frequency approaches the true probability — the foundation of modern statistics.
Special case when n = 1
Models single trial outcome
Approximation for large n, small p
λ = np fixed, n → ∞, p → 0
Approximation for large n
Requires np ≥ 5 and n(1-p) ≥ 5
Binomial distribution calculator and complete guide. Calculate probability mass function, cumulative distribution, and inverse cumulative probabilities. Learn binomial formula, real-world applications, normal approximation, and statistical properties. Perfect for statistics students, data scientists, and researchers.